Stroj UZ 50 Triumph je efektiven dvostranski stroj za posnemanje jeklenih, nerjavnih, HARDOX, DOMEX in aluminijastih obdelovancev največje globine posnemanja 62mm. Združuje 3 sisteme, to so stroj z avtomatskim pomikom in 3D manipulatorjem. Prenesi katalog tukaj...
■ unique MANIPULATOR 3D - manipulator provides a simple quick turn UZ50 Triumph of 180° to create double sided bevel X K. The operator does not need a crane to rotate the material. There is a significant saving of work time.
■ the unique clamping system allows the machine UZ 50 Triumph to be assembled and disassembled (Quick System) within a few seconds without using
■ the beveler UZ 50 Triumph is "floating" on MANIPULATOR 3D and compensates the unevenness of the floor or the deformations of the steel plate.
■ MANIPULATOR 3D allows the easy manipulation with beveler
■ the required height of the machine can be set up by MANIPULATOR 3D by lift handle
■ the movement of the machine is provided by massive wheels mounted on the carriage
■ the possibility to bevel with MANIPULATOR 3D or without
■ the possibility to use the MANIPULATOR 3D like a stationary station
■ EQUIPMENT for bevelling small flat steel
■ Equipment is intended for use with the machine UZ50 Triumph
■ With the equipment is machine UZ50 Triumph possible use for processing small workpieces
■ The machine Triumph UZ50 maintains a continuously adjust the bevel angle between 15°- 60°
Material specifications: for bevelling carbon steel, stainless stell and aluminium
thickness of material: from 7 to 70 mm
minimum dimension of material: 200 x 100 x 7 mm, with equipment for bevelling small flat steel
maximum dimension of material: unlimited
Engine milling head: power 4 000 W / 400 V / 3 phases / 50 Hz
cutting speed: 182,92 m/min
milling head: 85 mm with 5 inserts
Engine automatic feeding: 2x engine, power 120 W / 400 V / 3 phases / 50 Hz,
automatic feed speed adjustment with inverter 0-1,2 m/min, adjustment depends on cutting conditions
Triumph UZ 50 + MANIPULATOR 3D: 175 kg
EQUIPMENT for bevelling small flat steel - Art. Nr. 1942. The table mounted on beveler in up side down position
Table size: 700 x 200 mm
Working height: 914 mm
Weight (without machine): 30 kg
Smallest possible size workpiece: 200 x 100 x 7 mm
bevel angle α: 15-60° infinitely variableActive Smart Protection for your Triumph against overloading.
The System ASP actively measures the loading of your machine during continuous and demanding operation.
The System ASP constantly monitors the working dimensions of the UZ50 machine, the condition of its cutting inserts, the loading of its drive engine and the overall settings of the machine.
In the event that an operator uses the UZ50 incorrectly- the machine will say STOP!!!